Was a simple conversion. Added a longer zipper. (just pulled apart the seam of the old zipper)
A few gromets to see out of.
Electrical conversion was even easier.
Remove power supply (theres a threaded union)
connect to 18volt dewalt drill battery.
I’m gonna use a couple crimp on female connectors. I’ll crimp them to the wire and just slip the female connects over the dewalt battery terminals for a more secure fit.
It did blow the lights (we were gonna remove them anyhoo)
Approx 55min per battery (i have 2 and a quick charger)
The wire can then be slipped inside through the fan opening to allow total freedom to rome.
Thx guys. Yeah the actual inflatable stay puft costume just didn’t cut it. Party packagers sold us the inflatable for $69.99 (which we thought a steel) everywhere else is selling them for $100 here in canada.
Couple things I forgot to mention. The 18volt battery amped up the fan so it inflates much faster. It did however blow the light circuit (we had planned on moving it anyhoo.) If you do want the lights to work, stick with a 12volt battery (the fan is actually a 12volt dc fan)
When I saw that I laughed out loud here! I wish you’d posted it on youtube though, so I could download the video locally and show my wife on our big screen tv.
So what would be a good source for a 12 volt battery? is there something like that which is rechargible?
no name 12 volt drills are a dime a dozen. Ya usually get 2 batteries (some being quick charge.) Don’t matter if you cheap out and buy a referb either.
I’m just on my way out to pool, but I’ll dump it on the tube for ya later.
VERY cool! I’ll hold out showing the video to her until I can surprise her on the main tv here.
The foot bottoms could possibly be protected with some cuts of those foam interlocking floor mats. I noticed the ones at Sam’s had multicolors, and included white.
We had my huge halloween bash last night. Lots of inflatables there. Stay puft (larry) stood by the door and scared the ■■■■ outta peeps. Too figg’n funny.
Now I’ve known my budy Larry for 8ish years. He’s a big guy and I’ve never seen him dance. The true highlight of the night, was stay puft getting up infront of the bands and dancing his little heart out. The place was bursting at the seams with laughter.
As soon as the pic’s/ vid start rolling in, I’ll be sure to post them. (was too busy to take any myself)
As for the feet, here’s what we did. We used a large rubbermaid lid (6 gallon tote )
Cut the lid in 1/2 and removed the rim/seal.
Larry bought a cheap pair of shoes from walmart. With the shoes on the inside and the rubbermaid on the outside, We used 1/2" screws and just screwed into the soles of the shoes. (4 per-1-toe,2-ball,1-heel)
You’ll wanna keep the fabric trapped tight between the rubbermaid and sole. Ya dont want fabric wrapping around the screw. We had no problems, and the shoes held up all evening (5 hours and still strong)
The shoes made it real easy for larry to walk, run and even jump. Only thing he forgot to do was record some ghost buster clips on his ipod.