E-cig vent complete kit

What’s the O.D. on this unit? I have a smaller pvc n-filter.

just under 2.5" best i can measure with out caliper is 2 7/16"

I’m in for this kit!!!

What the hell, it is only money…put me down for a kit too please.

Okay, fine. I’ll take one…

PM’d. This is WONDERFUL!

Actually, sign me up for 2 total :slight_smile:

Put me on the list for one. Will the GBfans kit (run with a blue brick) power this or do I still need the battery?

I asked the same somewhere else and was told it was best to have a second battery. Something about Amps or something or other…

That and looking at the set up, the board is acting as an ON/OFF switch for the battery. I just wanted to double check. Very excited about this upgrade!

Right Alan the, relay actually switches the power to the vent, you’d only need a separate kill switch if you wanted to turn off the smoke completely while everything else is still on.I am going through all the PM’s and interest posts to put names with the last 2 slots I had on the run 2 list. As soon as i get confirmations from the people I’ve already responded to I’ll update the list. The response has been a little overwhelming, with requestss for at least 20 more kits over the 10 I’m aiming at on this run. I’m painstakingly making these with hand tools, so thanks for every one’s patience and I’ll do my best to accommodate all interested. If you are not on this list of 10. It may be up to a month before I can get all the parts.

I’m going to be busy getting this run put together for the next couple of days and should start shipping soon

I guess my question is, if you had a setup of 2 of the blue bricks, similar to what Julz has set up, can you just split the power line and have power from the batteries run to the gbfans board and to this setup? Or does that draw too much and drop power? Just curious, as if you already have 2 batteries and don’t want to add yet another one.

I’m not familiar with his setup, give me time to look at it and I’ll get back to you

This is what I was speaking of:

That’s how Charles has his and I tried using the battery powering the mighty and the vent worked, mixed result when I used same battery powering the amp since it uses a lot more current than the Mighty circuit, I used the 3rd small battery for the vent, maybe overkill, but I’m assured of all 3 circuits performing to the max and giving the longest possible time between recharges

I see. I haven’t looked into it (and don’t know enough about electronics) but can you either A) charge all batteries from the same jack at the same time, or B) charge all the batteries from the same jack, one at a time?

A: you could, but I wouldn’t/, wouldn’t not charge equally

B: also could, but better to have 2 jacks like Julz illustration so you can charge both at the same time with 2 separate chargers like in the pic of my sons pack

I’m totally cool with waiting. I didn’t even know I wanted this until yesterday :wink:

After continued testing, I have been able to get the smoke to work off 1 battery running just the the mighty and 1 battery on the gbfans sound and lights kit, I tested using two 9800mAh batteries, one for audio, one for the Mighty plus the vent circui tand on the gbfans setup one 9800mAh for sound, lights and vent. For those of you with more modest audio requirements, you can run everything off of 1 battery with the gbfans board or the mighty but time between charges may lesson a bit depending how often you trigger the venting.

I am going to start providing the kits without a battery and let every one play with the system to get some feed back on longevity, The small aux battery can always be added at a later date. I will edit the price to reflect savings for the smoke module minus battery, and charging connector, however I think the kill switch to disable the smoke is a good idea

Im down for 1 maybe even 2 if the wait list is still.on going