I can put some instructions together for this. I’ve made 3 vent systems so far, 2 for my Spirit Packs and one for a hero build I am working on. All the parts are available on Amazon, except for the e-cig components since they are banned. Those I got from an online vape store.
The trickiest part is wiring the e-cig because the air pump hose and power wires both go into the same end. For my hero build I ended up making an adapter so I can easily screw on/off the e-cig to remove, refill and replace. Other than that is really just putting the parts together.
Here is a list of the components:
-E-cig (I used the Ego clearomizer)
https://www.vaporauthority.com/products/genuine-kanger-ce4-long-wick-clearomizer
-Ego adaptor (optional)
https://www.vaporauthority.com/products/510-to-ego-adapter
-Air pump (12v)
https://www.amazon.com/gp/product/B0744FWNFR
-PC fan 50mm (5v)
https://www.amazon.com/gp/product/B07V5K75B2
-12v battery rated for 5amps
https://www.amazon.com/gp/product/B00MF70BPU
-12v to 5v step down regulator rated for 5amps
https://www.amazon.com/gp/product/B07P663XJV
-12v LED car light (I used 1156 type)
https://www.amazon.com/gp/product/B07BRDQ6RK
-Light socket (optional - I used 1156 type)
https://www.amazon.com/gp/product/B00EZE8V0I
-Air pump hose (I think I used 1/4"/ 6mm OD)
https://www.amazon.com/Penn-Plax-Aquariums-Flexible-Standard/dp/B0002563MM
-Wire (22 gauge or similar)
https://www.amazon.com/Electric-Flexible-Silicone-different-Electronic/dp/B07G2JWYDW
-PVC pipe (I used 1-1/2" socket coupler)
https://www.amazon.com/gp/product/B008FM9O0M
-3/4"/ 20mm tube (optional - I used this to mount the light socket on to the PC fan inside of the PVC pipe.)
Basic setup/overview:
PC fan attaches to the bottom of the PVC pipe so air blows through the top of the pipe and out the N-filter. Near the base of the PVC pipe you have 2 small holes, one for the smoke and one for the wires to power the LED which is mounted inside the PVC pipe sticking out of the top. The 12v battery, with your pack’s relay in line, provides power to the air pump, LED and 5v regulator. The 5v regulator provides power to the ecig and the PC fan. The air pump blows air into the ecig which provides smoke to the PVC pipe.
You’ll need a soldering iron to wire the ecig, all the other wiring you can do with connectors.
I can work on drawing up a diagram and take some pictures of my set up.