E-cig vent complete kit

sent PM for details

I’m very interested in one of your kits (though unfortunately it will be a little while until I can order one) and I have a few easy questions for you.

What is the OD of the PVC piece under the strobe?

Do you use li-ion batteries in the battery pack?

And lastly, do you have any information on how this might work with a Heavy Props / Crix light and sound kit yet? I’ve read through the threads and can’t seem to find any info on it yet (though I may be overlooking it).

Hi Jim,

These look fantastic - I’m going to PM you the details you mention for ordering but i have a quick question that maybe you or someone who already has this can answer.

I’m mostly doing a scratch build and my N-Filter is made from 2" PVC couplers with an I.D. of 2.375" - will that work well with this or would I need to make some modifications? If I could also get the overall height that would be awesome too.

Many thanks in advance for any input anyone can offer.

I did a quick test with the e-cig kit yesterday. It was really easy to install and it fitted perfectly in my GBFans shell. And best of all it works great and the effect is outstanding! Thanks again!

Anyone try to use this in the booster tube as well. I always thought it looked like something that would vent gasses. I’m tempted to try it. Just picture both the booster tube and the n-filter purging light and smoke! Thoughts?

sent a PM on Jul 30, no reply that I can find. are you still interested?

sent PM on Jul 30, still interested?

short video update of ecig vent with Crix sound board, same setup as gbfans sound board without gbfans pack light kit and others that do not provide an automatic overload/overheat vent sequence

I looked, but didn’t see a feedback thread for you, Jim. Is there one I missed, because I want to post glowingly fantastic feedback for you!

Feel free to start, I haven’t seen anything other than the great feedback left in this sale thread by other customers

Thanks for the opportunity to share my enthusiasm for tinkering

Bump for interest/availability.

Hi all, my father and I have been steadily building kits and shipping them out. I think at least 54 kits have been sent already; thank you, we definitely appreciate it! With Halloween approaching very soon, I want to advise that we will try to get as many built and out the door in time for all fellow fans that want to equip their packs with our E-Cig Vent Kits. If you’re interested in obtaining a kit, please post your interest here or PM my father ASAP to let us know so that we can get it to you before Halloween. We are starting to run low on some components and will need to reorder soon; this will help us gauge the amount of components to order. We also have TVG top nozzle vent kits available as well and look at custom set ups for other props that could incorporate e-cig smoke.

Below is a demo of my GB:TVG (Stage 1) pack that shows single and dual e-cig venting to get an idea of what our e-cig kits are capable of:

I am literally sitting here stupefied! Id bought my venting relay from Spongeface, received it yesterday and was delighted that after received your Venting E-Cig unit less than an hour ago I was ready to roll. In like 5 minutes…Plug and play is correct!!

It literally just plugged into my GB Fans Sound Board and the SF venting relay and Booyah! Moke!

oh, ok… so it took like 10 firings to fill the house, but I couldn’t stop pushing the trigger to see this inovative and very easy to use device at work!

You gentleman rock!!! When I am done with a ghost trap you will have my repeat business as well as any referrals!!!

Heart felt thanks!! I was instantly 10 years old again instead of 52. LOL. :smiley:

M

PM sent

Vincent has received it. Getting ready to go in my pack. Can’t wait!

Bench Test of my rebuilt Proton Pack with Full GB Fans Lights and Sound and The James and Charles Fincher E-cig Venting/Smoke Mechanism

You are going to love this awesome product James and Charles have put together! It was love at first Vent! Plus it was a super easy install. My pack is all separate wood and composite materials and it mounted right up!

M

where are instructions on how to refill? Video would be great!

About 1/2 way down page 1 on the following link is a clear pic of putting fluid in the cartomizer

1, The clear plastic tube connecting the tip of the ecig to the PVC fitting can be easily removed from the PVC

  1. Hold ecig tip up and unscrew the black tip careful to watch if inner silver tube containing wicks stays tight, this is the replaceable filament wick assembly

If it unscrews with the tip screw it back hand tight before proceeding

3, Fill cartridge by placing needle tip of fluid bottle in between cartridge wall and filament wick assembly and filling to 2.5ml mark

  1. Double check that filament assembly is still tight and then replace black tip, careful threads are very fine and possible to cross thread easily

  2. Replace plastic tube into PVC fitting, may require slight twisting motion as it is a tight fit

  3. Wait a couple of minutes to allow fluid to soak thoroughly up wick asssembly before applying power

This is a link to a video of the refill procedure:

http://vid749.photobucket.com/albums/xx137/jimfin3/E-cig%20tutorial/IMG_0474_zpsfry5jki1.mp4

Below are pics of a basic installation set up:

Pics of nfilter vent with TVG nozzle vent

2 videos of operation with nfilter vent and nfilter with TVG nozzle vent

http://vid749.photobucket.com/albums/xx137/jimfin3/E-cig%20tutorial/IMG_0463_zpsxd6wfg3z.mp4

http://vid749.photobucket.com/albums/xx137/jimfin3/E-cig%20tutorial/IMG_0472_zpsqzq3hcws.mp4

Is anyone else still having the issue with the strobe only flashing on for a split second?

I have tried a completely fresh set of AA batteries straight from the pack, as well as a brand new LED strobe, and am still having this problem. The fan and e-cig module still work fine, but I can’t get the LED to stay on, even with the new batteries/strobe.

I feel like something might be up with the voltage regulator? At this point, I’m pretty much out of ideas. The most annoying thing was that it worked great when I first got the kit!

The venting device was a HUGE hit at 2014 Spooky Empire here in Orlando Florida! I literally ran around for two days firing the neutrino wand to overheat and short venting it with the ear trigger. I checked the level of the glycerin mix after the first day and it only went down 1/4 of the volume of the e-cigs reservoir! I wanted to test the limit of how it would last at an event and it met the challenge, Even drawing a nod from special effects great Tom Savani when I fired it for someone near his table. The other GB Fans just loved it!! Thank you for taking my good pack to the next level!!

video instructions are great!! Thanks again!!