Gun light caps. WHere can I get'em

Hi all. Long time lurker.

I’ve read a lot of threads about a lot of things but I can’t seem to find anything on the light caps. The two on the top of the box and the one on the front, above the cylinder are all I need to finish. Can someone please help?

They’re linrose pilot lights. Venkman 71 identifies them in this Gun plans, and he gives the model numbers. Here’s where he talks about them: http://www.gbproject.com/plans/gun/3.html.

However, I have no idea where to buy them.

Join the club friend! :wink: Those dang light caps have eluded us for years.

There are a few close alternatives out there though.

Darrin

Venkman 71 suggests going to an electronics store other than Radio Shack and having them order the lights from linrose. Has anyone had any success doing this?

My bad. I thought you were refering to the orange cap light.

Orvac Electronics carries Linrose lights. They’re available online.

Darrin

You know, according to Stefan’s plans, the orangle light cap has exactly the same design as the light cap that goes next to the Clippard valve. Maybe it is the same, just painted orange? Anyway, I guess the only other thing to do is scratch-build it, or find an alternative. Venkman 71 suggests two different diameters or acyrlic rods painted orange (one rod to be the thin base and the other to be the main piece).

So, Orvac Electonics? Is their site Orvac.com? Do you have to order a catalog from them, or can you order online? Also, do they have a minimum order, and if so, how much?

The orange and white ‘hat’ lights aren’t completely elusive. Just nigh impossible to lay your hands upon. I’ve held two, and that’s about it. I think that’s the universal number, for people who do find these. That’s all they can ever get, or find.

For evidence that I’m not a liar:

Took me nearly a year of constant searching in order to track them down, and then the company wouldn’t sell. Figures, huh? I’d planned to make them available, once I got a quote on the, but they gave me some BS about only selling to companies, and in quantities large enough to make your eyes pop out.

The lights I did lay hands upon have since been sent out to be moulded, so they should, hopefully, be available in the future.

As for the white light next to the clippard, it is the same light, just a different colour, to the one on the end of the barrel. They came in orange, white, and I believe red. I think some of the background packs actually had a red cap on the barrel, rather than the orange, but that could have just been lighting.

Just another interesting tidbit. Some of the packs had the light a third time, on the top-side of the gun, next to the vents. The white one, to be exact.

As an alternative, you could always go with what I originally thought it was. Orange dust caps for pneumatic parts. They’re not exactly the same, but in a pinch, they’d certainly do. They even come in a milky-white colour, similar to the other ‘hat’ light, next to the Clippard.

I know it’s not a very good picture, but I had some a while back, and did some slight modifications to make them look more screen accurate. On the left side of my bumper (which is scratch built [don’t mind the remnants of botched paint jobs]), I have an un-modified dust cap. On the right is my modified version, which is pretty close to the dimensions of the real light.

Chris

I created the elusive one from scratch and will be offering it up shorty, although it may be after Halloween…

The final versions will have the LED cast into them, in white and orange… I will have other “close” lens cap/LED combos also for the remaining lights…

image

It seems that they do carry Linrose but their site is under construction so I can’t look them up. :x

Why are these things so hard to get?

Although not the right lights but only a close ones (these are the ones referenced in venkman71’s plans) I have a few of the B2990D3 Linrose lights (actually vintage IDI, pre-Linrose name change) in amber (orange) they would work OK for the front orange (knob/light)

I had purchased them for reference for my sculpt but decided to go at it myself, as these are a little smaller then Stefan’s plans…

image

$15 each shipped (I have 2) as you have found they are hard to source and expensive when you do…

Action Electronics carries the right lights. Some of them you’ll have to go into their catalogue for, but they’re there. You should be able to just drop them an e-mail, and such, if you can’t find the lights in the catalogue. I’ve never ordered from them, but others have, and they’ve had all of the lights for the packs in stock. Price-wise, though, they seem better than other places.

Oh, and for the Slo-Blo light. You’ll want to get Linrose Pilot Light B2150, the same one V71 lists for one of the others, you’ll want in red. I believe, though I’m not sure, that it’s B2150A1, rather than A4.

Chris

Well just so you know, the red light that goes on the back of the gun CAN be found at RadioShack, and is accurate. so THERE.

Technically, yes. In GB2, they did use a light similar to that ugly Radio Shack light for the Slo-Blo light. But, when I researched the lights, mostly while trying to track down the ‘hat’ lights, I noticed that the GB1 packs, that light was straight edged, not angled. It was the same light as the one atop the gun, near the vents, except in red.

So, yes, you can use the Radio Shack light, and get reasonably close (it’s still signifigantly larger, by the way. Compare scale. I believe the Linrose light that Exoray posted is closer), it just doesn’t look as good in my opinion.

Chris

So what sizes do you think? 1/2" for the one by the clippard and one by vents. 5/8" for the slo blo and top one by vent?