My pack scratch build plus packs for my kids

So after a long time of contemplating making my own costume and a long time of looking at different packs and plans, I decided to use Norm’s plans as a basis to build my pack. My two boys are (3 and 10) are also burgeoning ghostheads, and so I’m making them packs as well that they can wear for play, so I’m not going to be putting any electronics in them. I will be putting electronics in my pack however.

To start off, I found some kind of Nerf disc launching toy at Goodwill for a couple of bucks that I thought would make a great base for a cyclotron. I decided to start this thread after I took it apart, but I loosely put it together in order to give an idea what it looks like:

image

After I took it apart, I found that I can get two packs out of this. The open part will be my pack, and the back side will be on my 10 year old’s pack.

image

Here is a mock up of my 10 year old’s pack on the motherboard:

image

Here is mine:

image

In the middle of the circle for mine, I got a clear Betty Crocker/Rubbermaid container that can fit into it so that I can have the electronics. In order to get it to fit though, I had to put a cut along the side and epoxy it together to make it smaller:

image

Today we also primed the Nerf parts, but I didn’t take any pictures yet.

I’m trying to figure out the items I’m going to use for the rest of the pack. It looks like the Norm plans intend for the person to individually build the parts out of sheets of styrene. Is that correct?

What is the general consensus regarding deviating from the on screen looks for the packs? I’ve seen some really cool non-screen accurate packs, and it looks like i might have to deviate further with the design of my cyclotron.

I don’t think there’s anything wrong with them, there’s quite a few of them on these forums…

So my plan of getting these done this summer didn’t pan out, but I’m sure I’ll get them done by Halloween. I’ve been gathering parts and so today I mocked up what I have so far. I’m trying to decide what to do with the motherboards. I didn’t leave space on the sides to attach the power cells, so I have to decide if I want to just try to add little pieces off the edge of the existing board or if I need to get more plywood. Also, I think that I made the board too long on my 3 year old 's pack so I’ll be cutting that down. Anyway, here is what I’ve got so far. I think that all I need is resistors, some little parts, booster tube, and booster frame.

![image](http://www.gbfans.com/images/pb/DR-QC/Mobile Uploads_20140828_160633.jpg)

![image](http://www.gbfans.com/images/pb/DR-QC/Mobile Uploads_20140828_160639.jpg)![image](http://www.gbfans.com/images/pb/DR-QC/Mobile Uploads_20140828_160644.jpg)